買主資料

公司名稱:(扣件)_Erwin Halder KG
國別:德國
網站:www.halder.com
營業項目:Importer, Manufacturer
採購產品:
  • clamping element
    查看規格
    規格:clamping screws, t-bolts, DIN 787 material: heat-treated steel, black, forged, t-Slot guidance milled T-bolts when combined with DIN 6330 fixture nuts (EH 23070) and DIN 6340 plain washers (EH 23060) become complete clamping bolts
  • clamping element
    查看規格
    規格:spherical / plain washers shaft / plain washers, DIN 6340 heat-treated material: heat-treated steel, tempered, punched, mechanically trued, phosphatized
  • clamping elements, clamping nuts
    查看規格
    規格:fixture nuts, DIN 63330 (height 1,5 d) material: heat-treated steel, tempered, quality 10, phosphated, stainless steel 1.4305 The spherical face matches DIN 6319 conical seats (EH 23050). This combination enables compensating for uneven surfaces. and other fixture nuts
  • machine and fixture element
    查看規格
    規格:locating and seating elements feet, DIN 6320 with threaded shank feet can be used both as foot and as as eating element and stop. Load bearing surface without distrortion. material: heat-treated steel, unhardened, blackened
  • machine and fixture elements
    查看規格
    規格:swing bolts, DIN 444, form B material: heat-treated steel, tempered, quality 8.8, black, stainless steel 1.4301 swing bolts similiar to DIN 444 however, steel design with higher quality 8.8. The stainless stelle A2-50 design has tensile strenght of min. 500 N/mm²
  • machine and fixture elements
    查看規格
    規格:swing bolts DIN 444, form B, quality 8.8 high precision material: heat-treated steel, tempered, quality 8.8, black high precision design swing bolts exceed DIN Version’s quality. The thread is rolled - the shaft diameter is equal to the roll diameter, The surface -s- are machined. Bore tolerance d2 = H7
  • operating element
    查看規格
    規格:knurled nuts / knurled thumb screws, DIN 6303 material: free cutting steel, blackened, stainless steel 1.4305 assembly: form B: after beeing bored through the pin hole is to be situated within the tolerance field H7

時段

登入後查看可報名時段。登入

請點選時段報名,報名資料將送買主篩選並決定洽談會時段,本會將另通知獲選廠商正式洽談時段。報名程序:
  1. 填寫線上報名表
  2. 貿協彙整名單送買主篩選
    1. 獲選廠商
      貿協通知
      正式洽談時段
    2. 未獲選廠商
      系統寄送
      審核不通過信件
  1. 注意事項:完成報名之洽談會,皆可至「我的預約」查詢進度。